Cable ID

Cable ID  merupakan peralatan Cable Locator untuk memilih kabel dari beberapa kabel didalam tanah setelah diketemukan titik lokasi menggunakan hipot dan Cable Locator, hal untuk meminimalis kesalahan dalam perawatan kabel yang tertanam di bawah tanah.

Cable ID menerima gelombang electromagnetic yang di hasilkan oleh transmitter dan fleksibel clamp untuk melakukan pengujian secara mudah dan ringkas ringkas sehingga dapat dengan mudah di pindahkan ketempat lain, Cable ID dibekali dengan battery rechargeable yang dapat di isi ulang.

Cable ID yang merupakan peralatan Cable Locator di produksi oleh HV Diagnostic perusahaan dari negara Amerika yang sudah memiliki pengalaman di bidang peralatan elektrikal lebih dari 10 tahun.

Important Features
The EZ-Cable ID transmitter injects a special coded pulse sequence into one to three cables. The characteristics of these injected pulses are determined by the cable system that it is connected to. The verification process is then used to automatically establish and record these reference inject  signals at the known reference location on the cable. The identification process then correctly identifies or rejects the cables at the unknown point along the cable, by comparing the detected signals to those obtained during the verification process.

• Extremely simple, menu operated, automated backlit user interface.
• Simultaneous single and multi-phase identification of both energized and de-energized circuits (see options). There is no need to repeatedly go back and recalibrate the instrument after a single cable is identified.
• 3 cables can be identified in one action.
• Can be used on single and multicore cables.
• Non-volatile memory to store parameters.
• Load current and frequency measurement.
• Excellent noise immunity when identifying cables carrying high load current.
• Flexible pickup coil for tight congested cable locations.
• Handheld pickup coil “PUC” to ID and phase 3 conductor/ network type cables
• Powered by integrated battery or external ac mains.
• Correct phasing and identification of a three phase cable system, without having to remove any safety grounds on the cable.
• Prevention of user inadvertently changing gain / sensitivity settings to cause a possible wrong ID of a cable.
• Sophisticated algorithm assures accuracy during identifying process.
• Connection error notification – instrument notifies operator if a poor connection hookup is present.
• Can be used on LV, MV and transmission cable systems.
• Identification of cables through multiple transformers.
• Rugged transport case includes an internal cable pouch to neatly house alligator clips, test leads, power cords, etc.

unduh brosur https://bit.ly/3915Ie1

spesifikasi :